Initial Step: Get the Toilet Ready
Prior to commencing, ensure that the toilet has been flushed and that the water level is low. Instead of just dissolving in the water, the baking soda will be able to sit on the surface where limescale and stains build.
Step 2: Use a Lot of Baking Soda
Directly into the toilet bowl, sprinkle a large quantity of baking soda, paying special attention to spots where limescale or yellow stains are evident. It's easy for deposits to build up unseen in the under-rim region, so be sure to check there too.
• Ezoic
For best coverage, use an old toothbrush or toilet brush to distribute the baking soda evenly over the bowl.
Third, Sit Back and Let It Do Its Thing.
The baking soda needs at least fifteen to thirty minutes to settle. During this period, it will remove limescale, degrade stains, and soak up any remaining smells in the bowl. If the stain is very stubborn, waiting an additional hour may help get the best results.
The Fourth Step: Clean the Toilet
Once the baking soda has soaked into the bowl for a while, scrape it very well with a toilet brush. Pay close attention to places that are discolored or have limescale accumulation. To remove tough stains from toilets without harming the surface, try using baking soda, which has a slight abrasiveness.
Fifth Step: Flush and Evaluate
Flush the toilet once you've done cleaning to remove the baking soda and any remaining stains. Take a look and see if anything is still missing. If this is the case, you may either add a little vinegar for more cleaning power or repeat the procedure.
Improve Your Toilet Cleaning Procedure using These Additional Pointers
Although baking soda works well on its own, it may be even more powerful when combined with other all-natural products. For even better outcomes, consider these further suggestions:
1. For a Strong Cleaning Reaction, Combine Ezoic with Vinegar.
To make an even stronger cleaner, combine baking soda with white vinegar if you're dealing with stubborn mineral deposits like limescale. The acidity of vinegar aids in the breakdown of mineral deposits, while the baking soda eliminates smells and cleans dirt. They produce a fizzing reaction when mixed, which may help remove even the most entrenched stains.
How to Apply:
Once the baking soda has been applied, pour about one cup of white vinegar into the toilet bowl.
• Ezoic
Wait 10–15 minutes for the vinegar and baking soda to react; you should see fizzing.
Flush after brushing with a toilet brush.
2. Add a Touch of Lemon Juice for Extra Perkiness
Using lemon juice in the bathroom not only makes it cleaner, but it also leaves a pleasant aroma. Limescale and stains may be easily removed by using lemon, which also leaves a lovely aroma in the bathroom.
How to Apply:
Combine the baking soda and lemon juice into a paste.
Let the paste remain for fifteen to twenty minutes after applying it to spots with limescale or yellow stains.
• Ezoic
After you scrub and flush, the toilet bowl will be spotless.
3. Fragrances Made with Essential Oils That Last
Within a l
