Burnt out lamp, don’t waste money: the electrician’s technique to repair it in 1 minute


To repair a burnt out light bulb, you will need a small screwdriver, electrical tape, LED wire, and needle-nose pliers. Before you begin, remember to turn off the power to the lamp, this is the first step to working  safely. 

Firstly, use the screwdriver to remove the broken LED bulb from the lamp, be careful not to touch the glass of the bulb, otherwise you may get burned. After removing the broken bulb, remove the filament from the broken bulb with  needle-nose pliers.

Next, you will need to replace the LED string that you purchased from your trusted hardware store. Solder it perfectly using adhesive tape. Finally, insert the bulb into the lamp and turn it back on.

You will repair it in just a few steps,  in less than 2 minutes. Incredible right? Do-it-yourself remedies are always the best, because in addition to being cheap, they are also very easy, practical and quick. However, if you do not feel confident carrying out this small operation, contact an electrician.

Brunt lightbulb